Product Categories
- > Digital Textile Printer
-
- Fedar Sublimation Textile Printer
FEDAR FD61916E Sublimation Printer FEDAR FD1924 Sublimation Printer FEDAR FD1912S Sublimation Printer FEDAR FD61915E-A Sublimation Printer FEDAR FD5198E Sublimation Printer FEDAR FD51915E Sublimation Printer FEDAR FD53215E Sublimation Printer FEDAR FD61915E Sublimation Printer FD6198E 8 Heads Printer FD6194E 4 Heads Printer FD5194E 4 Heads Printer FD5328E 3.2m Printer FD5193E 3 Heads Printer Fedar TC Series Sublimation Printer(3heads,4heads,6heads)(Stop) FD5268E 2.6m Printer FD5223E 2.2m Printer (Stop) FD1900 2 Heads Printer AL193 3 Heads Printer (Stop) TC1932 2 Heads Printer (Stop)
- Fedar Direct Textile Printer
A3 DTF Printer FDA3 DTF Printer FD70-5 DTF Printer FD70-3 DTF Printer (Stop) FD30 DTF Printer (Stop) FD60 DTF Printer FD70-4 DTF Printer FD65-2 DTF Printer (Stop) FD70-2 DTF Printer (Stop) TR 4180 (Stop) FD 680 DTG (Stop) FD1828 Belt cotton printer (Stop)
- Fedar Sublimation Textile Printer
Digital Textile Printer Maintenance Guide
2025-07-28Environmental Requirements:
Clean, Dust-Free: Maintain dust-free environment; avoid smoke/dust sources.
Stable Conditions: Temperature: 18°C-30°C; Humidity: 35%-65%.
Clear Surfaces: Keep printer surfaces clear, especially of liquids.
Stable Placement: Ensure printer is level and media is flat during loading to prevent media deviation.
EMI Avoidance: Keep away from household appliances and strong electromagnetic fields.
Maintenance Procedures:
Encoder Strip: Regularly clean; ensure proper alignment to prevent carriage interference.
Filters: Inspect/replace clogged filters to maintain ink flow.
Capping Station: Keep clean to ensure effective printhead sealing.
Wiper Blade: Maintain clean, undamaged wiper blades for proper ink removal.
Ink Cartridges/Waste Tanks: Clean regularly to prevent sediment buildup and flow issues.
Stabilizer: Use dedicated 3000W+ stabilizer per printer for stable power.
Ink Levels: Monitor to prevent printhead dry-firing and clogging.
Print Platform: Keep free of debris to avoid printhead damage.
Printhead: Clean nozzle face and surrounding area carefully with lint-free swabs/cleaning fluid.
Ink Damper: Check for looseness; secure to prevent leaks.
Drive Components: Lubricate gears (e.g., air shaft), linear guides, carriage lift mechanism, and timing belts with appropriate grease.
Electrical Inspection: Check power cords/sockets for damage; replace immediately if faulty.
Dryer: Inspect wiring for aging; replace damaged lamps promptly.
Air Pump: Monitor/maintain correct pressure for media handling systems.